Feeds:
Posts
Comments

Posts Tagged ‘Persian Chandelier’

Much to my surprise and delight, the Chihuly chandelier is working! I’ve not done very much more as there have been a lot of other time-sensitive things this week, but all of a sudden, I can see my way clear. I realised that the edges of the ‘frilly plates’ were quite pointy-looking, like the points of the spokes of the back-stitched spider’s webs, so I’m not filling the spokes completely to echo this.

I’m so pleased with the way its coming together that I’m slightly resentful that other things have kept me away from it and also rather sheepish that it stalled for so long in the first place…

A couple of weeks ago I blogged about this underwater scene which I’d stitched onto dyed pelmet vilene and set into a silver Victorian coin brooch. I just felt the seaweed was a bit flat on its own and it needed a bit of something else.

One of the ideas I threw out was to add a silver fish and the more I thought about it, the more it felt like the answer. I had some tiny offcuts of textured eco-silver left over from the band of a ring I’d created when I did my silversmithing course back in 2013.

The right hand side of the bottom piece already looked a bit like a fish, so I used that line as a starting point and I carefully cut my fish shape out.

I filed, polished and refined it and added a simple drilled hole for an eye.

I realised that it needed to go behind at least some of the seaweed, so I took out one of the lines of feather stitch, put the fish in place and stitched the feather stitch back over the top.

I also added another line of Palestrina stitch in Sylko thread to hold the tail down before setting it in the brooch.

There was a little tube on the back of the brooch and it occurred to me that if I could get a jump ring through it, then I could make it transform into a pendant as well which would give it twice the opportunity to be worn. In the end it needed two jump rings, but I think they work well as a bale and a silver chain completes the transformation.

Unfortunately this weekend hasn’t been the best time to take decent photographs of it!

This is going to be a piece that will be very hard to part with and it was so good to get back to the silversmithing again. I’ve called it the ‘Silver Darling’ and it’s in my Etsy shop here.

Read Full Post »

It’s been slow and very steady but I’ve made a start on February’s Move It On Project! One of the ideas I’d had for representing the fluted plates of the chandelier was to crochet miniature circles in some wonderful Mulberry silk thread that I’ve been saving for a special occasion with one of my collection of tiny Victorian steel crochet hooks.

As I was making a prototype and wasn’t really sure if it would work or not, I ended up using a coton a broder rather than potentially damaging the precious silks. I made a simple chain ring and then added rounds of double crochet, finishing with little chain picots and it worked!

Happy that crochet circles were going to work for the 3D element of the chandelier, I went back to thinking about what I wanted for the surface stitching. Initially I was thinking about using woven spiders web stitches, but when I looked more carefully at the fluted circles, I realised they are quite heavily ridged.

So more like a back stitched spiders’ web. And there is the added advantage that you can work partial back stitched spider’s webs, which would work for the elements that are side on. The crochet circle isn’t in the final position, just there for scale.

It all looks a bit sparse and not very flamboyantly Chihuly at the moment, but the most important thing for me is that it’s a start.

Most of the rest of my stitching this week has been very uninteresting. Needlelace samples for a workshop and trying to put together kits for the Ribbon Rose brooches which at the moment just looks like a pile of papers and boxes!

But I have finished a couple of pieces of upcycled jewellery. First is a lovely pair of broken vintage Mexican silver clip on earrings which had had the clips sheared off. I filed the rough edges away and then drilled a couple of holes in the top of the silver settings and attached a pair of new silver earhooks. They can be found here in my Etsy shop.

Then I removed the mechanism from a lovely single 1950s French jet (black glass) clip on earring and combined it with a vintage 1970s stainless steel ring blank to make what I think is a very elegant cocktail ring. The facets really make it glitter when it catches the light. It’s here in my Etsy shop.

I’ve also turned some lovely vintage teddy bear buttons into stud earrings.

They may be a bit battered and worn but I think they are still very cute!

Read Full Post »

The project I’ve chosen to focus on for this month’s Move It On is a relatively new one and the reason that my Kew Memory Journal has stalled. I’ve already done four of the six pieces for it and last spring I started the fifth, based on a photo I took of one of Dale Chihuly’s Persian Chandeliers which was installed in the Temperate House at Kew Gardens in 2019.

I drew out the pattern of the glazing bars on a piece of indigo dyed cotton and as of last April, using thin white ribbon for the thicker bars and whipped back stitch for the thinner ones, had got as far as this:

The fun bit was next – creating the frilly circles of the chandelier – but at this point I froze up because I didn’t think I could stitch anything that comes close to representing Chihuly’s amazing art. I had various ideas about making wired edged needle lace slips, crochet circles using my tiny Victorian metal crochet hook and woven spiders web stitches. I reminded myself that I was only aiming for my impression of the chandelier but I was really reluctant to start and instead, put it to one side.

So this is where the Move It On project will hopefully help. By the end of the month I should know whether I can make this work or whether I abandon it and create a different fifth piece for the Memory Journal. The hard bit is going to be actually making that start!

As I’ve had the Inktense blocks out, colouring some pelmet vilene for the Ribbon Rose Brooch kits, I thought it was the ideal opportunity to stitch an embroidered centre for a silver Victorian brooch I’ve had for some time. I think these type of brooches were originally designed to be set with coins, but the empty frame makes an ideal surround for a piece of miniature textile art!

I went with my favourite colour palette and one of my favourite themes as there are so many stitches which suggest waving seaweed such as the feather stitch and threaded chain stitch…

…and a line of Palestrina stitch to fill in the gap on the right.

I’m very happy with the stitching but I feel it’s a bit flat, so I’m toying with ideas for a bit of extra dimensionality. I think it might be a bit too small to add even very tiny pieces of sea glass so I was thinking beads or possibly picots at the bottom. Or possibly a little silver fish… Any thoughts?

Read Full Post »

As I suspected, finding the right white for the vertical glazing bars of the Temperate House was a pain. I ended up with a selection of white threads, ranging from good old Anchor stranded cotton to some fabulous Gloriana 12 strand silk called ‘Fresh Snow’ which is too perfectly white, silky soft and beautiful to use!

After standing in the sunny garden laying threads out alongside the ribbon and seeing how just one or two strands compared with the way the thread looked in the skein, I finally settled on a Dinky Dyes stranded silk in ‘Natural’.

I initially used back stitch rather than my go to split stitch as I wanted a stronger line but I wasn’t happy with the breaks between the stitches, so I whipped it to give more solidity.

The lines are similar rather than identical to the original, but when I referred back to the source photo, I realised how subtly the spacing and angles of the bars changed as their perspective to me altered. Had I drawn this from memory, all those lines would have been parallel and evenly spaced. It was a very useful lesson in observation.

I’ve also continued with the or nué acorn and started the coloured couching in single strands of stranded silk. Despite my initial concern that it was at an angle to the gold, I felt the first part of the cup worked well. It was only when I came to add the highlight that it started to get a bit challenging.

I wanted the highlight to curve round the cup, but working in straight lines makes that difficult, especially as this piece is so small. Not really knowing what else to do, I just carried on stitching to see if I could make it work out. By this point I had started the acorn, so things were ramping up on the difficulty scale, not least having four needles on the go at once.

I know I have the tendency to overcomplicate things, but I did think an acorn would be a relatively simple thing to stitch! Once I had sort of wrangled the highlight on the cup I realised I needed to add a lighter colour to the acorn. Unfortunately I think I should have introduced it at least a row previously…

It wasn’t working and I needed help to see where the shading was, so I added some lines to give me an idea of where the changes need to happen. Suddenly I feel more confident about it.

I think I will have to go back and unpick some of the darker green on the row or two above and add the mid green, but I’ve decided to continue and finish the design first and see how it looks. This is very much a first attempt at a new technique and it will do me good to not obsess about everything I do having to be perfect straight out of the box.

Read Full Post »

After having stitched the next section of ribbon for the glazing bars of the Temperate House at Kew down with stab stitches, it was clear that the original blanket stitches had to come out. Much better.

This has made it less bulky, so I decided to take Rachel’s (VirtuoSew Adventures) advice and run the bars right across the background.

Next I need some white thread for the thinner vertical bars, but there is white and white, as I found out a few years ago when I stitched a whitework piece and discovered that the threads I thought were identical under artificial light certainly were not in daylight! So I’m leaving the thread matching for a day with good natural light.

I’ve just added this sweet little upcycled sea glass brooch to my Etsy shop. It was one of those satisfying moments when after having trawled through a large pile of sea glass finding pieces that were almost but not quite right, I picked up this gorgeous green oval and it clicked into the vintage brass brooch setting like it had been made for it.

As if I didn’t have enough projects on the go, this week I’ve started a little or nué design of an acorn. I painted it onto some indigo dyed calico, left over from the Persian Chandelier piece with my Inktense sticks, which I love.

Then I started couching down the gold threads, using Pearsall’s ‘Gossamer’ thread. It’s so thin, it’s literally like stitching with spider’s web, so perfect for the job. It was a bit challenging to make the gold thread turn as tightly as possible at the ends , but so far, so good.

As I approached the edge of the acorn, I realised I hadn’t made things easy for myself. I was going to hit the acorn at an angle, rather than straight and this was going to potentially make it more difficult to get the shading right.

However, considering the amount of time it had already taken me to get this far with the gold, I have decided to keep on and see what happens. If nothing else, it will be an important lesson and remind me to do a bit more research before I blithely jump into a brand new technique!

Read Full Post »

I was very tempted to get straight into the fun bits of needle lace and crochet, but realistically it was more important to work out the background first to make sure all the little twiddly bits were to scale. I chose this photo:

because the lines of the Temperate House glazing form an interesting but not overpowering background. I turned it into greyscale as I did with the bollock purse from the Tattershall Journal so I could focus on the lines and patterns and then transferred the design onto a piece of indigo dyed cotton.

My white pen is obviously running out but as it’s one that develops over time, I can’t tell that at the point I’m tracing the design! At least there was enough of the design marked up for me to start stitching. I decided to use very fine ribbon for the thicker bars to contrast with whatever line stitch I choose for the thinner bars and have blanket stitched the first one down with fine sewing cotton.

Unfortunately further stitching was curtailed by two and a half days supply teaching followed by my first Covid jab and 24 hours lost to feeling rough from the after effects. Looking at it again, I like the width and solidity of the ribbon but I’m not sure about using blanket stitch to attach it. It looks a bit too raised and I’m wondering if I might try stitching the next one down with tiny stab stitches to keep the ribbon smoother.

I did manage to do a bit of playing with a sample of Hungarian Braided Chain Stitch at the weekend. I’d seen someone using it on Instagram and was rather taken with the result. Mary Corbet came up trumps as usual with an excellent tutorial which you can find here and this is the result of my experiments.

I’m really pleased with the weighty, corded effect it gives and the colour changes in the variegated perle thread.

I love stitches that looks as impressive as this one but are in fact very straightforward to work. Another new one for the repertoire!

Read Full Post »

I thought I’d started the Baby Leaf-Tailed Dragon in 2018, which would have been bad enough, but the blog post from September 2018 when I moved him from a hoop to a frame and really got going, says I started him in 2015 – July 2015 to be precise. I did quite a lot of work on him in 2019 and even got as far as starting to couch the outline but then, like so many things last year, he lapsed and it wasn’t until last week that I picked him up and finally finished the couched outline. The next stage was to add the split stitch highlights. I’m always worried I’ll put them in the wrong places and it will look odd, so I usually prevaricate at this point, but I decided to just get on with it.

The result was a lot less difficult than I thought (it usually is…) and so his lower tail is nearly done!

I’ve also decided to get on with the last two pieces for my Kew Memory Journal. I want to base one on the beautiful Chihuly Persian Chandelier that was hung in the Temperate House.

I thought the wavy edged circles could work either in needlelace or crochet and while I decided which one would be most effective, I started a small sampler of needlelace stitches.

Corded Brussels Stitch is my go to needle lace stitch and after having worked the Single Brussels – twice – I know why. The Corded Brussels is always worked in the same direction. When you get to the end of the row you run the thread across the front, back to the start and then work over it, incorporating it into the stitch. It makes the lace firmer and because there is something to work over, more even, and the stitches all run in the same direction.

The Single Brussels is worked from left to right and then when you reach the end of the row, back from right to left. I’m not very right handed and can work most stitches both right and left handed but I could not for the life of me get the rows even. On the left to right rows I could make the buttonhole stitch loops stay open but right to left they just wanted to flatten down to the stitch underneath. The second version is better than the first, but not by much.

However, as a sampler and a learning exercise, it’s been very useful.

The last old favourite is the final two kilt pin brooch kits.

Forest green, golden yellow, and brown.

and

Orange, bronze, brown, purple and gold.

Listed today in my Etsy shop with free UK P&P.

Read Full Post »

Stitching Diaries

Level 3 Stitched Textiles Embroidery with Distant Stitch

summerholiday111

stitching, creative textiles, inspiration

Claire Steele Textiles

Stitched Textiles and Sketchbooks

hertstitch

for embroiderers and textile artists in hertfordshire and beyond

karensstitchography

Embroidery & other craft

re:retro

collecting retro

View From Our Hill

Textile, Mixed Media, Yarn, Books and Beads

Things I find in the garbage

I'm a professional scavenger making a living selling curbside garbage. This blog details my finds and sales. It also acts as an archive for things beautiful and historic that would otherwise have been destroyed.

Stitched up with Thread

Slowly threading things together through stitch

Lincs In Stitches

Creative ramblings in the Lincolnshire Wolds

Kiln Fired Art Blog

Crafts and the outdoors - slow living involving handmade ceramics, painting, textiles, walking and good food

Hillview Embroidery

Teaching and Learning One Stitch at a Time

Dreaming In Stitches

a mingled yarn

sunshine and celandines

These are a few of my favourite things.

LucyAnn &Luna craft

crafting,dachshunds including other bits & bobs

Carlseapatch's Weblog

A log of progress (I hope)and fun in textile arts

seafieldview

Life on a Cornish cliff

late start studio

Late . . . in taking my creativity seriously.

Shibori Girl

....practicing the fine art of shibori

Pomegranate Studio

- because making is good for us

Fall from Grace Crafts

A blog on my craft journey highs and lows...

opusanglicanum

one Englishwoman's work

Playful Bookbinding and Paper Works

Chasing the Paper Rabbit

Chrissie Freeth - Tapestry Weaver

Blog of artist and tapestry weaver Chrissie Freeth

debbidipity

into textiles & beyond

KDD & Co

Award-winning Scottish publishing and design