Posts Tagged ‘pendant’

I fell in love with a bought an antique Art Nouveau broken silver plated belt on eBay several years ago purely because of the Green Man masks on each section.

green man

I knew they would make gorgeous pendants/necklaces but I only got round to it the other day when I unearthed a damaged silver chain which was the perfect weight and patina to work with the panels.

There was just enough chain to make two necklaces.  The loops at the top of the panel were perfect to attach the chain, but that still left the loops at the bottom, which looked a bit odd without anything attached, so to the first one I added a drop with green cat’s eye beads, silver colour leaf beads and a central silver and abalone shell pendant from an odd earring, all threaded onto a length of silver wire.


For the second one I used an odd labradorite earring drop, two labradorite beads on oxidised silver wire and a tiny length of silver chain to make the drop.


They were a delight to make and can be found here and here in my Etsy shop.

Then only a few days later, I was looking for something else when I found some vintage embroidered linens in the back of a cupboard. Among them were two napkins, one quite badly holed and inspiration struck again! I cut them into sections for brooches or pendants and added to each one a hoop from various bits of odd vintage jewellery – bangles and earrings. The result…



…three brooches: large Daisy Spray, medium Daisy Wreath and small Golden Daisy


…and two pendants: Red Bellflower on the left and Brown Daisy on the right.


For each one, I laminated two circles of buckram together and gathered the embroidered piece of fabric over it to stiffen it and did the same with a plain piece for the back. Then I hand stitched the circles together with the assorted hoops/bangles sandwiched in between to give the whole thing stability. I used a variety of stitches including herringbone stitch, ladder stitch, beaded ladder stitch and chain band (below) to give an attractive finish to the edges.

DSCN8948.JPGIt then depended on whether the hoop I used already had an integral loop or not whether the finished piece became a pendant or brooch.  Lots of fun but not appreciably more space in that cupboard – two napkins go a long way!

Read Full Post »

If we have had a workshop of some sort at our Embroiderers’ Guild group, then at the next meeting there is a space available for people to bring their workshop pieces, whether finished or just continued, to show. It was fantastic to see what had happened to the stitch play pieces from my workshop in December.









Many thanks to everyone who brought along their work – glad you enjoyed it!

I’ve also been doing some more upcycling. First, I turned a single 1980s enamelled earring which looked like orange sherbet into a beaded brooch. I removed the post and then beaded it onto some hand dyed vintage cotton fabric with some matching pearlised opaque orange seed beads using peyote stitch.


Then I gathered the spare fabric over the back and ladder stitched it to the covered vilene circle onto which I’d already stitched the brooch back.


Then I could add the edging in a mixture of clear orange, opaque pale yellow and very pale lilac beads, to echo the colours in the swirl.


It’s not a terribly quick thing to stitch, but a lot of fun to do!

Among the oddments I scored from my Dad’s workshop last year were some bits of veneer that he had hand cut. This little piece is apple wood.


I wondered what would happen if I doodled on it in black pen…


…and then cut it into sections to fit in this vintage bracelet.


Measure twice, cut once…


Hold your breath and hope…


…and be pleasantly surprised at the result.



I’ve also added nuggets of sea glass and sea washed china to a selection of vintage pendants, brooches and rings.









They are all sitting in my Etsy shop now, waiting for loving homes!

Read Full Post »

This week it was bitterly cold but bright – perfect for sanding the drawers of my ’60s teak chest of drawers outside.

Starting point: tired, faded, stained.



Simply sanded as close as I could get to the handles. The handles are amazing. Most furniture has at least one loose handle. Not this one. Every single handle is rock solid, glued, screwed or whatever, but it’s a good job I love the original handles because they were NOT coming off…

20171208_104022_HDR.jpgThen laborious sanding down by hand to get to this:

20171208_105617_HDR.jpgThree more to go before the Danish Oil could work its magic. And what magic! I was prepared for it this time but it still blew me away.


20171208_144549_HDR.jpgThree coats of Danish Oil and a thorough polishing with beeswax later, it was transformed from this: 20171126_105438_HDRTo this:

20171210_104643_HDR.jpgIt’s now in my bedroom filled with Christmas presents and fabric. I absolutely love it! :o)

I’ve also had a bit of a metalwork session. I loved the effect of the printed silk carrier rod behind the rescued gold tone bib, so I hunted out some of the brass I impressed when I did my silversmithing course several years ago…


…and started to play.  This is going to be a pendant.


And this, a brooch.

DSCN7587.JPGI love cutting fiddly shapes with the piercing saw, letting it and the texture of the metal dictate where it goes and making these pieces has been a joy. I have an oval pendant on the way too. More photos to come.

Read Full Post »

I’ve been restocking and updating my Etsy shop with that December thing coming up fast on the horizon and although a lot of my pieces have involved sea glass, sea washed china and found objects, I did get inspired by another vintage brooch without a central stone.


So I gathered some supplies and started to stitch a ribbon rose on some scraps of hand dyed silk.


With a woven rose in the middle, split stitch curling stems either side and some french knot buds, it stitched up quite quickly.


Then I layered three pieces of pelmet vilene, each slightly smaller than the other to create a domed shape, gathered the silk around the dome and pulled it up tight. A piece of the rust coloured background silk covered the gathering at the back and then I set it in the brooch.


You can find it here.

I also created this flotsam assemblage pendant



…from a piece of wave worn aluminium…


…which I beachcombed ages ago and just love; a piece of tactile driftwood and a long nugget of sea glass which sat in the groove of that grain perfectly.


A treasured oval piece of multicoloured Seaham sea glass went into a vintage pendant.


And rich green oval nugget of sea glass went into another vintage pendant.


In fact I managed to find and nearly match so many lovely green pieces that I was able to add a pair of upcycled vintage clip on earrings


..and a bracelet.


It’s lovely to be able to reuse some of these gorgeous pieces and bring broken jewellery back to life again.

Read Full Post »

I’m on a roll!

An upcycled bracelet,


Pisces necklace,


Branch necklace,


Green daisy necklace,


Broken vintage brooch turned into a pendant


…and another upcycled broken brooch. This one does actually have embroidery in it!

The main piece was a ring brooch in lovely condition with all the original stones intact, but no pin, so I got rid of the remains of the pin mountings and decided to fill the middle with a back stitched spider’s web, rather like a Dorset button.


I’d got about a third of the way through the stitching when I looked on the back and decided I preferred that effect. So out it all came and I started again!


Much better.


Filling up the space nicely…


…and completed.


The thread is quite a thickish cotton and the web is really firm and sturdy. The back is neat too, but I’m pleased I chose to restitch it.


I added a vintage bar tie-pin as the brooch back and it covers the scars of the old closure quite nicely.


Very pleased with this!


The only other sewing I’ve been doing is a major repair job on one of our Scunthorpe Little Theatre Club costumes – a wartime woollen coat that somebody has turned into a pirate captain type coat. Various seams have given way and the gold braid is coming adrift everywhere.

Not creative in quite the same way, but extremely satisfying.


Read Full Post »

It is high time I started to practise my metal-working skills again so I decided to start small, cutting out a rose leaf shape from sheet brass and piercing it with holes before I textured it with the hammer.


Then I used some green perle and using the holes, put in the foundation stitches for a woven spider’s web which I worked in a gorgeous variegated pink and green silk ribbon.


It worked out perfectly so I had a green centre shading out to the deep pink edge. I neatened it up with a piece of pink kid leather over the back and added a jump ring to turn it into a sweet little mixed media pendant.


One of my Christmas presents was a Dremel engraver so I had a bit of a play with that, first using one of the included stencils to add a rustic star shape to a piece of sea glass which I then turned into a pendant.


Then I moved on to a piece of reticulated brass which I created on the silversmithing course I took in Sheffield a few years ago. I had deliberately worked the reticulation from either end of the piece of brass in order to leave a smooth bridge between them for some text. Finally, I had the tool to add the lettering!

I used uncial script and the H of ‘haven’ looks a bit like an R, unfortunately, but I really like the way the engraver worked on the brass.


I turned this into yet another pendant and gave it a lovely vintage sari silk strip ribbon to hang from in crimson and gold.


My other Christmas present thanks to some vouchers was a doming set and I was dying to have a go at doming some old coins that I’d accumulated. Tiny bronze British decimal half pennies seemed to work best and I combined one that I’d hammered into a hemisphere with a ‘cornflake’ of reticulated brass that I’d also domed. I drilled them both through the middle and chose an odd stud earring with purple diamantes like stamens of a flower to connect them together.



I’ve got a piece of fantastically patterned gilding metal to which I hope to attach the ‘flower’ which I can then turn into a brooch. It’s been good to play with metal again!

Read Full Post »

It was a pleasure to finish the little Bossa Nova Rose from our Embroiderers’ Guild Brazilian Dimensional Embroidery workshop last weekend. I didn’t follow the instructions when it came to the leaves, going for fly stitch over blanket stitch and not adding the fine pale green edging it suggested because I felt the sheen of the thread gave enough definition.



And then quickly finished as a card.


My first sea glass and pocket watch case pendant positively flew out of my Etsy shop and I’ve started another one to go with a harlequin case of a gold coloured collar and engine turned back. I’ve got some tiny pieces of very rare yellow sea glass and some ordinary brown to add to this.


I also turned some off cuts of hand dyed fabric, the batik I’m using above and some cotton print in shades of brown into some strip patchwork which I used to cover a grotty looking cabochon pendant…


…turning it into an upcycled patchwork pendant with added vintage lace and flower trim.

Lots going on!


Read Full Post »

Older Posts »